Difference between revisions of "Tips and wrinkles 2"

From Biopowered
Jump to: navigation, search
(Created page with "To keep the page sizes of biopowered wiki managable, we've started a sencond Tips and wrinkles page ... __TOC__ ==Y Piece== Useful for separating off the flow when using an E...")
 
Line 31: Line 31:
 
</gallery>
 
</gallery>
 
[[User:KH|KH]] 23:45, 25 June 2011 (BST)
 
[[User:KH|KH]] 23:45, 25 June 2011 (BST)
 +
 +
==Mini HPT==
 +
 +
Quick, simple and cheap method for performing the [[Hot pan test|HPT]] which means you don't have to use the kitchen stove with associated smell in the house!
 +
 +
1 night light, the container from a second and a piece of bent electrical wire.  It reaches temperature very quickly, but due to the flimsy nature of the container, cools down when the oil is added.  So it needs to be left with the flame burning for a few minutes to reheat.
 +
 +
<gallery caption="Mini HPT" widths="350px" heights="400px" perrow="1" align="center">
 +
File: Mini HPT.JPG|
 +
</gallery>
 +
 +
[[User:Bio-rich-time-poor|Bio-rich-time-poor]] 12:10, 26 June 2011 (BST)
 +
  
  

Revision as of 12:10, 26 June 2011

To keep the page sizes of biopowered wiki managable, we've started a sencond Tips and wrinkles page ...



Y Piece

Useful for separating off the flow when using an Eductor Just a case of filing/grinding away on the two bits of pipe untill you get a nice close fit and then silver soldering in place

KH 22:47, 25 June 2011 (BST)

Using "Hozelock" type quick release connectors

Not to be used in the bio making process

The brass type hozelock connectors can be useful for various connections outside of making bio and can be used on small bore( ID 14mm) piping BUT you need to replace the O ring with a "Viton" type The O ring is 2mm with a diameter of 12mm,the plastic that clamps the pipe to the fitting is ok with biodiesel but they can be done away with and a jubilee clip used anyway,they also remain airtight upto about 20 PSI (see pics)


KH 23:45, 25 June 2011 (BST)

Mini HPT

Quick, simple and cheap method for performing the HPT which means you don't have to use the kitchen stove with associated smell in the house!

1 night light, the container from a second and a piece of bent electrical wire. It reaches temperature very quickly, but due to the flimsy nature of the container, cools down when the oil is added. So it needs to be left with the flame burning for a few minutes to reheat.

Bio-rich-time-poor 12:10, 26 June 2011 (BST)