Difference between revisions of "3D Printed parts and spares"
| Line 72: | Line 72: | ||
<br> | <br> | ||
| − | <gallery heights="200px" widths="400px" perrow="2" caption="Land Rover IP removal tools" align="center"> | + | <gallery heights="200px" widths="400px" perrow="2" caption="Land Rover 300 tdi IP removal tools" align="center"> |
File:Land Rover 300tdi IP locking tool.png|IP locking tool | File:Land Rover 300tdi IP locking tool.png|IP locking tool | ||
File:Land Rover 300tdi flywheel locking tool.png|Flywheel locking tool | File:Land Rover 300tdi flywheel locking tool.png|Flywheel locking tool | ||
Revision as of 20:57, 22 March 2015
At the time of creating this page 3D printing is still in its infancy, but in the belief this technology will become more wide spread, on this page we include some spare parts and small items useful in the home production of biodiesel and WVO preparation.
There are currently two types of plastic commonly used for 3D printing, PLA and ABS. Of these two PLA is the easiest to use and appears, from tests so far to be reasonably resistant to biodiesel, methanol and WVO. It has a low melting point and hence can't be used for any high temperature applications and it is not compatible with any of the catalysts used in biodiesel production. Additionally, due to the way 3D prints are laid down, it is strongly recommended that printed parts are not used for any pressure applications without rigorous tests being carried out by the person manufacturing the parts.
It would appear that some of the more commonly used pumps in the UK have terminal boxes manufactured from a plastic that's not compatible with biodiesel. It's hoped that the items below printed in PLA should out last the original parts.
Contents
TAM 105 terminal box
This box also fits a a GRC Aquatec 82lpm pump. Longer screws may be required as the wall thickness has been increased from the original design.
- TAM 105 replacement terminal box
Completed print
Fitted
Bottom section
Download .stl file
TAM 120 terminal box
Fixing pillars within the box have been made considerably stronger by blending them into the box walls.
Longer screws may be required as the wall thickness has been increased from the original design.
- TAM 120 replacement terminal box
Completed print
Strengthened pillars for fixing screws
Fitted
Leo XKM60 terminal box
- Leo XKM60 replacement terminal box
Completed print
Strengthened pillars for fixing screws
Fitted
Land Rover 300 tdi injection pump and flywheel locking tools
- Land Rover 300 tdi IP removal tools
IP locking tool
Flywheel locking tool
