Twin tanking - Peugeot Boxer 350 LWB 2.5D - Minibus/camper/van

[Rotary-Motion]

I'd be concerned that the wheel is going to bounce around and buckle the door. Can you get a piece of ply wood to distribute the load on the inside of the door? Nice idea though. Tidy.


"theres 2 metal plates inside the door to stiffen it all up..."
Missed that. No flys on you, but you can see where they've been..........

see the plates?

[greasemonkey]

I'd be concerned that the wheel is going to bounce around and buckle the door. Can you get a piece of ply wood to distribute the load on the inside of the door? Nice idea though. Tidy.


"theres 2 metal plates inside the door to stiffen it all up..."
Missed that. No flys on you, but you can see where they've been..........

see the plates?

I'd posted about the plates before I saw the update in the thread.

[Rotary-Motion]

hi guys

well finished off sticking me BOXER sign and moved the reversing sensor down lower on that door the wheel was covering it, also fitted a padlock on the hole that was left  gotta love diatsu 4x4's hehe..

[K.H]

Nice job,looking good, sure we could rustle up a white van for you to do a few jobs on 

[Rotary-Motion]

Nice job,looking good, sure we could rustle up a white van for you to do a few jobs on 

i doubt he will let me touch his pride and joy hehe, he dont trust me...

kieth well your here you got any pipe with outside die of 19mm rubber or plastic? its to shove in the waste sink hole (22mm tank connector) into a container to collect waste water, bout a metre

cheers

[K.H]

I will ave a look tomorrow night, what days u in?

[Rotary-Motion]

I will ave a look tomorrow night, what days u in?

tomorrow im in spoke to steve earlier, seemed to think come in... thurs i think im rotavating the front?

[Rotary-Motion]

The cat loves the new tyre early in the morning, not so cold on her butt 

[Rotary-Motion]

hi all

well as you all been sunbathing and having bar B que's i been working over the bank holiday on a mates camper fitting a 2 seater arrangement that when the boards are slotted down the middle makes a double bed about just over a days work, i did this in a swap off the guy for a TRUMA gas water heater, bang tidy crackin... 

here she is under test, these bad boys go for £450 on the bay of e new, and its very very rare you see a sceondhand one up for sale...

its a 10ltr stainless steel tank with a thermostat control from 25c to 75c, and heats quietly and quickly

just got to find somewhere to fit it now to vent gases outside 

[Rotary-Motion]

hi all

well been doing abit more over the weekend, managed to fit me new TRUMA water store heater, what a learning curve that was, wouldnt fancy fitting another, a hell of alot goes into one, gas/water/12volt/fitting/alignment, but got there in the end, do like a challenge hehehe, also i fitted my new mixer taps, love these its all double o-ringed so the spout moves both ways unfixed, bang tidy, and got all fittings and pipes under the box cover (nothing hidden!), also managed to utilize the free heat given off well cooking up, going to use this heat to take the chill off the van when sleeping...  just waiting on the 2x vent covers to go over the holes 

heres some pics - enjoy....

[Julian]

I was impressed up to the point of noticing the smiley.

[Rotary-Motion]

I was impressed up to the point of noticing the smiley.

i did write ya name on it too, but marker pen ran out lol (true story!) well spotted hehehe 

[Rotary-Motion]

hi all

done abit more to the van, put lino/carpet/vents in, on...

 

before



after

[greasemonkey]

Tidy, looks very professional conversion with the carpet on it. What sort of carpet are you using? What are you sticking it on with?

[Rotary-Motion]

Tidy, looks very professional conversion with the carpet on it. What sort of carpet are you using? What are you sticking it on with?

not sure what its called GM, it came free from next door, small peace i cut up, i used carpet spray glue, the box stuff doeant quite match the sides of the van, but hey it was free...

just took delivery of my fiamma levelling ramps and slip mats today, waiting on a table leg tube to turn up with top and bottom mounts...