Yet another pumps thread

[Tony]

The little one is less than that even - 250W.  You're right, they can't be high pressure.  Fine for biodiesel mixing as you say though.  Seems almost a shame to pass them up at that money, but shed space is scarce!

[knighty]

oops, edited post and fixed it


yeah.... so cheap... bet they were a fortune new!

[Julian]

Bare shaft Mono in Deeside ... nice and cheap at the moment and with reasonable postage.  Looks like it includes a coupling too ...




http://www.ebay.co.uk/itm/mono-Industrial-Pump-/321191161953?ssPageName=ADME:B:SS:GB:3160#ht_102wt_1134

[Julian]

Mono MS in Llanfyllin (where ever that is ... assume Welsh land)

Spare stators are around 50 quid each new ...  http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=151111379372&ssPageName=ADME:B:SS:GB:1120#ht_142wt_1134




I think the seller may have the port size wrong, I believe these are ¾" BSP, unless the elbows are reducers.

[greasemonkey]

Mono MS in Llanfyllin (where ever that is ... assume Welsh land)

Spare stators are around 50 quid each new ...  http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=151111379372&ssPageName=ADME:B:SS:GB:1120#ht_142wt_1134




I think the seller may have the port size wrong, I believe these are ¾" BSP, unless the elbows are reducers.

If anyone buys it, and the seller is obliging enough to get it to Llandrindod, or round abouts, then I can collect it off them. But I am NOT driving to Llanfilin for it........

[Julian]

Bit pricey at £150, but he may take an offer.  A  little Mono MS in Telford ...




http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=151144904035&ssPageName=ADME:B:SS:GB:1120

Assume it's 230v as it has a capacitor.

[Julian]

Mono ML with a 2900 rpm single phase motor, so higher flow rate.  Buy it now at £75.00 ... not a bad price.




From the pictures it looks like the suction end has been welded (tricky on a casting), but for what we do a skim of plastic metal should be a reasonable fix.

[Tony]

Good price.  That's the one I use, it sure gets through oil.

[Head Womble]

Mono ML with a 2900 rpm single phase motor, so higher flow rate.  Buy it now at £75.00 ... not a bad price.




From the pictures it looks like the suction end has been welded (tricky on a casting), but for what we do a skim of plastic metal should be a reasonable fix.

Some might like to see a link, but others may not be too bothered.

[Tony]

Mono ML with a 2900 rpm single phase motor, so higher flow rate.  Buy it now at £75.00 ... not a bad price.




From the pictures it looks like the suction end has been welded (tricky on a casting), but for what we do a skim of plastic metal should be a reasonable fix.

Some might like to see a link, but others may not be too bothered.

Dude as Head Womble you're too used to people bringing you things - around here we have to find it ourselves

[Head Womble]

Some might like to see a link, but others may not be too bothered.

Dude as Head Womble you're too used to people bringing you things - around here we have to find it ourselves

No no no young Tony, you've not grasped this wombleing thing have you,
we wombles make good use of what everyday foke throw away, t's the Womble way.

[Julian]

Ok, Ok ... I could make the excuse that I was going to bid myself and just wanted to wind everyone up, but no one would have believed it.

The more plausible truth is that I forgot, sorry.  To make matters worse I've deleted the email that delivered the search results.  I'm sure if some one is interested they'll find it either by searching or doing something clever with the picture properties.

[Head Womble]

http://www.ebay.co.uk/itm/Engineers-Equipment-Dresser-Diesel-Transfer-Pump-Mono-/350916463241?pt=LH_DefaultDomain_3&hash=item51b4404a89

Wasn't hard to find Julian.

[whatarascal]

http://www.ebay.co.uk/itm/Engineers-Equipment-Dresser-Diesel-Transfer-Pump-Mono-/350916463241?pt=LH_DefaultDomain_3&hash=item51b4404a89

Wasn't hard to find Julian.

What sort of flow rate would that pump give?

[julianf]

Theyre not huge flow - i think 40 or 60 lpm, somthing like that.

But pumping high volumes isnt their tallent anyhow.


If you google "mono ML" im sure the specs will come up.


(i have a mono ml, but i cant recall the specs that accuratly!)