Difference between revisions of "Winter fuel additive testing"
m (Recategorise to "Finishing" category (as it's a final stage in the treatment process)) |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
==Introduction== | ==Introduction== | ||
| − | Some winter fuel additives were tested with | + | Some winter fuel additives were tested with biodiesel made from a mix of soy/rape. Drip cup tests were performed to assess viscosity (times are in seconds - smaller times have faster liquid flow and therefore show less viscosity). |
| − | This Biodiesel starts to gel at - | + | This Biodiesel starts to gel at -1°C and at this temp the drip cup test is 23.3 seconds. |
<i>Many thanks to K.H for performing this testing.</i> | <i>Many thanks to K.H for performing this testing.</i> | ||
| Line 111: | Line 111: | ||
</table> | </table> | ||
| − | ==Samples at -19. | + | ==Samples at -19.5°C== |
| − | [[File:Winter additives 1.jpg|-19. | + | [[File:Winter additives 1.jpg|-19.5°C]] |
| − | ==Samples at - | + | ==Samples at -10°C== |
| − | [[File:Winter additives 2.jpg|- | + | [[File:Winter additives 2.jpg|-10°C]] |
==Samples at room temperature== | ==Samples at room temperature== | ||
| Line 121: | Line 121: | ||
[[Category:Biodiesel]] | [[Category:Biodiesel]] | ||
| − | [[Category: | + | [[Category:Safety and Testing]] |
Latest revision as of 19:58, 8 March 2013
Introduction
Some winter fuel additives were tested with biodiesel made from a mix of soy/rape. Drip cup tests were performed to assess viscosity (times are in seconds - smaller times have faster liquid flow and therefore show less viscosity).
This Biodiesel starts to gel at -1°C and at this temp the drip cup test is 23.3 seconds.
Many thanks to K.H for performing this testing.
Contents
Results
| Ref | Additive | Dosage | Drip cup -19.5C |
Drip cup -10.0C |
Drip cup -5.5C |
Cost per treated litre |
|---|---|---|---|---|---|---|
| 1 | Petrol | 5% | 33.5 | 33.1 | 33.0 | 6.00p |
| 2 | XC40 | 0.3% | 35.9 | 34.9 | 34.1 | 6.24p |
| 5 | Hiberna | 0.3% | 40.8 | 34.4 | 34.2 | 5.7p |
| 4 | Coldflow 350 | 0.3% | 41.4 | 38.7 | 34.4 | 6.87p |
| 7 | Diesel | 20% | 45.0 | 37.1 | 33.2 | 28p |
| 6 | Acetone | 0.15% | 46.2 | 34.7 | 34.4 | 1.05p |
| 3 | Synergy | 0.3% | 54.9 | 39.0 | 33.8 | 6.24p |
| 8 | Stanadyne | 0.3% | Crystals | Crystals | 34.1 | 5.53p |
| 9 | Control | - | Solid | Solid | Solid | - |
Samples at -19.5°C
Samples at -10°C
Samples at room temperature
