Processor build step by step
 This page is Work In Progress and therefore may not be complete.
|
There are a number of ways you can get hold of, or make a tank. This page describes how a tank can be made using a 44 gallon drum and a home made come.
File:File:20140323 133719.jpg
Contents
The TOC tag creates a content box. The text it contains is generated automatically based on the page headings. Delete this text once you have read it.
Processor tank
Text and photo content here ...
- This is a gallery, blah, blah, blah
Text under pic here.
Text under pic here.
Text under pic here.
Text under pic here.
Text under pic here.
Text under pic here.
Text under pic here.
Welding a cone to a drum.
It is far easier to weld a lap joint than try to lay a fillet considering the gauge of the drum.
You will need 0.6mm wire and a proper shield gas that is suitable for shallow penatration, Co2 isn't really good enough.
Fit the cone on the drum and tack the lap joint every 6 inch, close down any gaps between the cone and drum wall, grind flush all tacks.
Lay the drum on its side and weld in a downward direction between the 10 and 20 past position. You'll have to get the weld speed, amps and wire feed just right so a bit of practice will be needed before you weld in anger.
Grind back flush the last 15-20mm of each section of weld and start the next section on top of it, when you get to the last run of weld grind both ends flush so you start and finish over the existing welds.
First Sub-heading here
Text and photo content here ...
Delete if not required.
Second sub-heading here
Text and photo content here ...
Delete if not required.
Second heading here
Text and photo content here ...
Delete if not required.
First Sub-heading in second heading here
Text and photo content here ... Delete if not required.
Second Sub-heading in second heading here
Text and photo content here ...
Delete if not required.
etc etc
End the page with the headings below...
See also
Use if there are similar pages in the wiki, if not delete.
- Link within this wiki here
- Link within this wiki here
- Link within this wiki here
References
Use if you need to cite reference material you've used , if not delete.
- First ref here
- Second ref here
Further reading
Use if you can detail any useful reading matter, if not delete.
- Book details here
- Book details here
- Book details here
External links
Use if you can list any useful links on the internet, if not delete.
- Link outside this wiki here
- Link outside this wiki here
- Link outside this wiki here
Originator to sign and date here by using 4 "squiggle marks"
... delete this "nowiki" tag once you have set your categories (it's just there to stop this section getting indexed on the main page!)
Add categories ... By using categories your page will get indexed on the wiki main page.
For Biodiesel ...
[[Category:Biodiesel]] sets the main category.
Now select one from the following, deleting the others:
[[Category:Introduction to Biodiesel]]
[[Category:Ingredients and preparation]]
[[Category:Processing methods]]
[[Category:Processors and equipment]]
[[Category:Finishing]]
[[Category:Safety and Testing]]
Do the same for Veg oil ...
[[Category:vegetable oil]]
Select one from the following, and delete the others:
[[Category:Introduction to veg oil use]]
[[Category:Collection & regulations]]
[[Category:Filtration & drying equipment]]
[[Category:Testing]]
[[Category:Vehicle modifications]]
If your page is applicable to both veg and bio, you can have a total of four category listings.
Please Note: To get your page indexed on the main page it is necessary, to got to the main page, click the edit tab and then click save.
... delete this "/nowiki" tag once you have set your categories (it's just there to stop this section getting indexed on the main page!)
