Author Topic: Improvement on the standard diffuser? (Read 3385 times)

Julian · « **on:** November 04, 2012, 03:16:34 PM »

The tap on our lovely, half installed and much moaned about kitchen is fitted with an aerator. For the uninitiated, these entrain air into the water flow and reducing the flow and saving the planet. They also dramatically reduce splashing when the water flow hits the bottom of the sink, and besides, the fizzy water just feels nice.

Anyway, more interested in bio than finishing the kitchen, what if this were fitted to the outlet pipe of a diffuser? It would reduce splashing ... I know K.H has complained of splashing in the past, and by entraining air into the flow should increase the surface area before hitting the diffuser.

They should be good for around 60°C as they're designed to operate with hot water. Different viscositys may prevent them from operating correctly, and I've no idea if they would be bio/veg compatible, but it might be worth a try.

This one seems to have few plastic parts and is a reasonable price ... http://www.ebay.co.uk/itm/Faucet-aerator-male-external-thread-M24x1-ref-90-24-/150561449307?_trksid=p3284.m263&_trkparms=algo%3DSIC%26its%3DI%26itu%3DUCI%252BIA%252BUA%252BFICS%252BUFI%26otn%3D21%26pmod%3D230788314399%26ps%3D54

Julian · « **Reply #1 on:** November 05, 2012, 11:50:10 AM »

BUMP!

I don't come up with these brilliant ideas for fun you know!

But seriously, anyone any thoughts ... even if it's to tell me it's a stupid idea?

Tony · « **Reply #2 on:** November 05, 2012, 12:03:31 PM »

I'm not entirely sure how it entrains air into the water? Does the air go up the sides and is then somehow introduced?

If it works for bio/oil it would be a bloody good way to dry/demeth it. Imagine that in a processor headspace during demething.

K.H · « **Reply #3 on:** November 05, 2012, 04:47:45 PM »

Buy one and let us know how it works then we can all make one for nothing if its any good

K.H · « **Reply #4 on:** November 05, 2012, 04:50:45 PM »

Quote from: Tony on November 05, 2012, 12:03:31 PM

I'm not entirely sure how it entrains air into the water? Does the air go up the sides and is then somehow introduced?

If it works for bio/oil it would be a bloody good way to dry/demeth it. Imagine that in a processor headspace during demething.

Looks like it sucks air around the inner ring and enters through the slots,should be easy enough to make one esp after Julian takes close ups of the one he,s buying for the good of us all

,generous guy that Julian

Julian · « **Reply #5 on:** November 05, 2012, 04:57:25 PM »

No, no you've got it wrong ... I'm just an ideas man.

I'll get in before others do ... not much of an idea and not much of a man!

Didn't think of putting it in the processor. But isn't that just doing what the venturi is supposed to do?

What we need is an enterprising member with a BIG pump, a bolt on flange on the processor and a condenser, who can rig up several on a new flange all discharging into the ullage space.

K.H · « **Reply #6 on:** November 05, 2012, 05:02:25 PM »

Damn,rules me out then,i havent got a condensor!,Tony?

Julian · « **Reply #7 on:** November 05, 2012, 05:05:38 PM »

You've got a plumbers delight tube ... don't tell me you haven't fitted it yet.

K.H · « **Reply #8 on:** November 05, 2012, 06:53:15 PM »

You didnt notice it sat on the shelf in my garage then?,these things take time y,know

Head Womble · « **Reply #9 on:** November 05, 2012, 10:13:36 PM »

I have a bigish pump (110lpm) but no bolt on flange, although I could pipe it up to my storage/preheat drum,
however time to build and test it is allways a problem.

Biopowered - vegetable oil and biodiesel forum

Biodiesel

Biodiesel equipment

Improvement on the standard diffuser?