« previous next »
Pages: [1]

Author Topic: Pumpage on t'bay  (Read 4634 times)

Offline Tony

  • Administrator
  • Oil baron
  • *******
  • Posts: 5108
  • Fo' shizzle, biodizzle
    • Southampton Waste Oil Collection
  • Location: Southampton
Pumpage on t'bay
« on: June 17, 2012, 03:37:45 PM »
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=261047000741

Might be good for anyone considering 500l steel vessels as processors?  Not the cheapest though.
« Last Edit: June 20, 2012, 10:11:37 AM by tony »
Logged

Offline K.H

  • Administrator
  • Oil baron
  • *******
  • Posts: 2353
  • Location: Tosser towers
Re: Pedrollo 160lpm on t'bay
« Reply #1 on: June 17, 2012, 08:57:58 PM »
Is  Head Womble sorted pump wise?,probably got half a dozen he found on the common!
Spotted this one but cant find much on it

http://www.ebay.co.uk/itm/270999439192?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_500wt_1202
Logged

Offline Tony

  • Administrator
  • Oil baron
  • *******
  • Posts: 5108
  • Fo' shizzle, biodizzle
    • Southampton Waste Oil Collection
  • Location: Southampton
Re: Pedrollo 160lpm on t'bay
« Reply #2 on: June 17, 2012, 11:07:13 PM »
Not sure, I thought he had a fair old pump already (I've seen the inside of his shed!).

That one on ebay... could be anything. :)
Logged

Offline K.H

  • Administrator
  • Oil baron
  • *******
  • Posts: 2353
  • Location: Tosser towers
Re: Pedrollo 160lpm on t'bay
« Reply #3 on: June 18, 2012, 09:02:57 PM »
Logged

Offline Tony

  • Administrator
  • Oil baron
  • *******
  • Posts: 5108
  • Fo' shizzle, biodizzle
    • Southampton Waste Oil Collection
  • Location: Southampton
Re: Pedrollo 160lpm on t'bay
« Reply #4 on: June 18, 2012, 10:06:01 PM »
Hehe yeah oddly enough the guy that asked the question at the bottom of the listing... was me!

Shame it is three phase.
Logged

Offline K.H

  • Administrator
  • Oil baron
  • *******
  • Posts: 2353
  • Location: Tosser towers
Re: Pedrollo 160lpm on t'bay
« Reply #5 on: June 19, 2012, 08:08:25 PM »
Logged

Offline Tony

  • Administrator
  • Oil baron
  • *******
  • Posts: 5108
  • Fo' shizzle, biodizzle
    • Southampton Waste Oil Collection
  • Location: Southampton
Re: Pedrollo 160lpm on t'bay
« Reply #6 on: June 19, 2012, 09:54:45 PM »
I also saw that one, I think it's multistage with stainless impellers.  Nice bit of kit, if a little on the power hungry side.  About hour and a half drive from me.  Shame it isn't more local!
Logged

Offline Head Womble

  • Wiki Editor
  • Oil baron
  • *******
  • Posts: 2082
  • I like shiny things
  • Location: Heathrow area
Re: Pedrollo 160lpm on t'bay
« Reply #7 on: June 20, 2012, 09:25:57 AM »
No head womble hasn't got another pump as yet,
but I run a 110lpm pump at the mo with an eductor on 180L batch size.

That LOWARA TECHNOSPEED in Godalming is a lovely pump, those inverta driven ones are very pricey when new,
oh and it's not far from me (but closer to Julian) if you need it picking up.

Just had a search and it's 120lpm but set it up right and it'll perform bettor than my one, ummmmmm do I need it.

I will be watching it just in case it goes for silly money,
but in realaty I'm not looking for a new pump as yet, well not until I get another two or three of those 500L beasts.
I have however all but finished my new shed, 13ft x 8ft, it's huge compared to my old one.
« Last Edit: June 20, 2012, 09:38:36 AM by mark »
Logged
Skoda Yeti L&K 2L TDI 150 CR DPF Adblue, running pimp diesel.
VW Golf SV 1.4 TSI DSG.

Offline Tony

  • Administrator
  • Oil baron
  • *******
  • Posts: 5108
  • Fo' shizzle, biodizzle
    • Southampton Waste Oil Collection
  • Location: Southampton
Re: Pedrollo 160lpm on t'bay
« Reply #8 on: June 20, 2012, 10:02:24 AM »
Bad news on the Lowara; HM and HMZ pumps have technopolymer impellers.  Only the HMS has stainless.  So best avoided for biodiesel.  Shame as it'll go for a song, but what use is a polymer impellered pump to us?
Logged

Offline Tony

  • Administrator
  • Oil baron
  • *******
  • Posts: 5108
  • Fo' shizzle, biodizzle
    • Southampton Waste Oil Collection
  • Location: Southampton
Re: Pumpage on t'bay
« Reply #9 on: June 20, 2012, 10:13:40 AM »
This 140lpm multistager would be tempting as it's all stainless:

http://www.ebay.co.uk/itm/LOWARA-VERTICAL-MULTISTAGE-PUMP-5SV09-240V-/130712752518

Only trouble is that the datasheet shows EPDM wear rings between the stages, and no mention as to whether these can be changed or not.  With bio it would bind the impeller eyes to the diffusers between stages over time.
Logged

Offline K.H

  • Administrator
  • Oil baron
  • *******
  • Posts: 2353
  • Location: Tosser towers
Re: Pumpage on t'bay
« Reply #10 on: June 20, 2012, 06:34:20 PM »
Anyone bidding?
Quote from: tony on June 20, 2012, 10:13:40 AM
This 140lpm multistager would be tempting as it's all stainless:

http://www.ebay.co.uk/itm/LOWARA-VERTICAL-MULTISTAGE-PUMP-5SV09-240V-/130712752518

Only trouble is that the datasheet shows EPDM wear rings between the stages, and no mention as to whether these can be changed or not.  With bio it would bind the impeller eyes to the diffusers between stages over time.
Logged

Offline Head Womble

  • Wiki Editor
  • Oil baron
  • *******
  • Posts: 2082
  • I like shiny things
  • Location: Heathrow area
Re: Pumpage on t'bay
« Reply #11 on: June 20, 2012, 09:40:41 PM »
Not me mate.
Logged
Skoda Yeti L&K 2L TDI 150 CR DPF Adblue, running pimp diesel.
VW Golf SV 1.4 TSI DSG.

Offline Tony

  • Administrator
  • Oil baron
  • *******
  • Posts: 5108
  • Fo' shizzle, biodizzle
    • Southampton Waste Oil Collection
  • Location: Southampton
Re: Pumpage on t'bay
« Reply #12 on: June 20, 2012, 10:43:05 PM »
Not me.  They do go for big money though.

If you get it and it turns out the wear rings are just changeable o-rings I'll be both happy for you and a bit green with pump envy!  However I suspect they're built like on the Calpedas so only good for water.
Logged
Pages: [1]
« previous next »