« previous next »
Pages: [1]

Author Topic: gl build  (Read 2038 times)

Offline willbuild

  • Valve head
  • ****
  • Posts: 354
  • 350 slc what i save on bio, I spend on this
  • Location: spain malga
gl build
« on: April 07, 2014, 09:06:51 PM »
Have just started building my second gl processor. my first gl had a non return valve on the line that injects the metoxide that i removed to help draw in chemicals. I noticed that in the diagram on the wiki page, no valve is shown. is it needed?
my first had the venturi mounted at the top horizontally, this one is vertical
Logged

Offline Julian

  • Administrator
  • Oil baron
  • *******
  • Posts: 6389
    • Used Cooking Oil Collection website
  • Location: East Surrey, UK.
Re: gl build
« Reply #1 on: April 07, 2014, 09:11:52 PM »
General wisdom now is that the NRV is not needed.

As for the venturi being vertical or horizontal ... just stop poking the hornets nest!
Logged
Used Cooking Oil Collection website ... http://www.surreyusedcookingoilcollection.palmergroup.co.uk

Offline willbuild

  • Valve head
  • ****
  • Posts: 354
  • 350 slc what i save on bio, I spend on this
  • Location: spain malga
Re: gl build
« Reply #2 on: April 07, 2014, 09:23:15 PM »
I think you just poked it. watch this space :)
Logged

Offline Chug

  • Administrator
  • Oil obsessive
  • *****
  • Posts: 784
  • Location: Herts
Re: gl build
« Reply #3 on: April 07, 2014, 10:02:17 PM »
Non return valve is not needed and my venturi is horizontal.
Logged

Offline Head Womble

  • Wiki Editor
  • Oil baron
  • *******
  • Posts: 2083
  • I like shiny things
  • Location: Heathrow area
Re: gl build
« Reply #4 on: April 07, 2014, 10:11:59 PM »
Non return valve is not needed and my venturi is vertical.
Logged
Skoda Yeti L&K 2L TDI 150 CR DPF Adblue, running pimp diesel.
VW Golf SV 1.4 TSI DSG.

Offline Tony

  • Administrator
  • Oil baron
  • *******
  • Posts: 5110
  • Fo' shizzle, biodizzle
    • Southampton Waste Oil Collection
  • Location: Southampton
Re: gl build
« Reply #5 on: April 07, 2014, 10:23:00 PM »
Venturi alignment unimportant so long as output flow sticks the the sides of the output cone :)
Logged

Offline Mickindashed

  • Oil stirrer
  • **
  • Posts: 55
  • Location: new forest
Re: gl build
« Reply #6 on: April 08, 2014, 08:16:13 PM »
Mine works fine without a non return valve. As for the Venturi, I started off with it mounted horizontally and it didn't suck very well. It worked much better when I moved it to a vertical position.
Logged
Pages: [1]
« previous next »