Author Topic: Added page on two stage processing  (Read 5912 times)

Offline Tony

  • Administrator
  • Oil baron
  • *******
  • Posts: 5114
  • Fo' shizzle, biodizzle
    • Southampton Waste Oil Collection
  • Location: Southampton
Added page on two stage processing
« on: March 29, 2011, 10:24:19 AM »
http://www.biopowered.co.uk/wiki/Two_stage_processing

Any comments?

I'd quite like to make it a little less dry by adding a pic of the Glycerol being slurped back in or something.  I'll take some pics next time I do a batch - trouble is there isn't much to see.

Maybe I can take two samples during processing, and compare side by side in a pic so the relative amounts of settled glycerol can be seen at the ends of stage one and stage two.

Offline Julian

  • Administrator
  • Oil baron
  • *******
  • Posts: 6391
    • Used Cooking Oil Collection website
  • Location: East Surrey, UK.
Re: Added page on two stage processing
« Reply #1 on: March 29, 2011, 10:58:41 AM »
Nice page, well done!

I used to do a 3/27 at the end of the first stage, just out of interest.  I don't bother any more, but a photo of a 3/27 at the end of the first stage compared to one at the end of the second might give some visual value.


« Last Edit: March 29, 2011, 11:01:40 AM by Julian »
Used Cooking Oil Collection website ... http://www.surreyusedcookingoilcollection.palmergroup.co.uk

Offline Tony

  • Administrator
  • Oil baron
  • *******
  • Posts: 5114
  • Fo' shizzle, biodizzle
    • Southampton Waste Oil Collection
  • Location: Southampton
Re: Added page on two stage processing
« Reply #2 on: March 29, 2011, 12:12:31 PM »
Ah, interesting idea.  I'm quite curious as to the results of that too. :)

Another point, we have a mix of 27/3 and 3/27 references in the wiki, I'd like to make them consistent.

I've always called it a 27/3, but I see the original infopop thread calls it 3/27.

Also, googling "27/3 test biodiesel" returns 100k hits and "3/27 test biodiesel" returns 167k hits.

So I'd be tempted to adjust my personal lexicon and make 3/27 the wiki standard if that's OK with everyone else?

Offline Tony

  • Administrator
  • Oil baron
  • *******
  • Posts: 5114
  • Fo' shizzle, biodizzle
    • Southampton Waste Oil Collection
  • Location: Southampton
Re: Added page on two stage processing
« Reply #3 on: March 29, 2011, 12:15:05 PM »
Actually:

27/3 test site:vegetableoildiesel.co.uk - 2500 hits
3/27 test site:vegetableoildiesel.co.uk - 950 hits

So it's more popular to call it 27/3 in the UK.

Sigh, nothing is ever simple is it?

Offline Julian

  • Administrator
  • Oil baron
  • *******
  • Posts: 6391
    • Used Cooking Oil Collection website
  • Location: East Surrey, UK.
Re: Added page on two stage processing
« Reply #4 on: March 29, 2011, 12:37:54 PM »
No it's not!  I've always known it as a 3/27 test and have only noticed it being called 27/3 in the last few months.  What ever we decide I think we have to keep a constant standard.  Being a stubborn old sod, I'd go for the former, it's what it started out life as.


 Also it's not an issue, but isn't it easer to write a link [[titrate|Titration]], than add redirects for each variant?  Or is there some other cunning reason I've missed?
Used Cooking Oil Collection website ... http://www.surreyusedcookingoilcollection.palmergroup.co.uk

Offline Tony

  • Administrator
  • Oil baron
  • *******
  • Posts: 5114
  • Fo' shizzle, biodizzle
    • Southampton Waste Oil Collection
  • Location: Southampton
Re: Added page on two stage processing
« Reply #5 on: March 29, 2011, 01:28:46 PM »
Probably, I'll change it.

I've also added a 3/27 page if you wouldn't mind a peer for factual correctness.

http://www.biopowered.co.uk/wiki/3/27_test

Offline Julian

  • Administrator
  • Oil baron
  • *******
  • Posts: 6391
    • Used Cooking Oil Collection website
  • Location: East Surrey, UK.
Re: Added page on two stage processing
« Reply #6 on: March 29, 2011, 01:40:01 PM »
Been a busy boy then ... another good page, well done.

I added an ° sign, but isn't the ration 1:9?

Probably being too precious now but I think we've usually put "Source: BassAddict" in the past to credit photos.
Used Cooking Oil Collection website ... http://www.surreyusedcookingoilcollection.palmergroup.co.uk

Offline Tony

  • Administrator
  • Oil baron
  • *******
  • Posts: 5114
  • Fo' shizzle, biodizzle
    • Southampton Waste Oil Collection
  • Location: Southampton
Re: Added page on two stage processing
« Reply #7 on: March 29, 2011, 01:44:24 PM »
That's not precious, that's diligent, and I appreciate it being pointed out.

I've made the appropriate corrections.

Just keeping an eye on http://www.biopowered.co.uk/wiki/Special:WantedPages and what we're missing :)

Offline Julian

  • Administrator
  • Oil baron
  • *******
  • Posts: 6391
    • Used Cooking Oil Collection website
  • Location: East Surrey, UK.
Re: Added page on two stage processing
« Reply #8 on: March 29, 2011, 02:17:57 PM »
Yes, I keep looking at that page and thinking I should get my finger out, but I'm just really busy with "stuff" at the moment.  Works slow, so I should have a bit of time, it's just that "stuff" keeps getting in the way.  Can't work out how I fitted "stuff" in when I had a proper job!

I'll make a separate post so no one's double working, but I'll shortly have a bash at the venturi and eductor pages.  I want to make an eductor for my plant, so I'll do a step by step photo guide to accompany the text.

Also in the middle of making a multi function 20 litre drum warming come fat melting come static dewatering come 40 litre preheat tank.  So I'll do a page on that too once the "stuff" is out the way!
Used Cooking Oil Collection website ... http://www.surreyusedcookingoilcollection.palmergroup.co.uk

Offline Tony

  • Administrator
  • Oil baron
  • *******
  • Posts: 5114
  • Fo' shizzle, biodizzle
    • Southampton Waste Oil Collection
  • Location: Southampton
Re: Added page on two stage processing
« Reply #9 on: March 29, 2011, 02:33:41 PM »
I know exactly what you mean  ;D

There's lots of things I want to do but stuff gets in the way...

Offline Chug

  • Administrator
  • Oil obsessive
  • *****
  • Posts: 787
  • Location: Herts
Re: Added page on two stage processing
« Reply #10 on: March 30, 2011, 06:29:48 PM »
It's been 3/27 for years, it's only recently I've seen people getting it the wrong way round.

Offline Tony

  • Administrator
  • Oil baron
  • *******
  • Posts: 5114
  • Fo' shizzle, biodizzle
    • Southampton Waste Oil Collection
  • Location: Southampton
Re: Added page on two stage processing
« Reply #11 on: April 02, 2011, 08:12:13 PM »
Julian, I followed your suggestion and have a fabulous photo to add - will hopefully add it before too long!

Good suggestion chap :)

Offline Tony

  • Administrator
  • Oil baron
  • *******
  • Posts: 5114
  • Fo' shizzle, biodizzle
    • Southampton Waste Oil Collection
  • Location: Southampton

Offline Julian

  • Administrator
  • Oil baron
  • *******
  • Posts: 6391
    • Used Cooking Oil Collection website
  • Location: East Surrey, UK.
Re: Added page on two stage processing
« Reply #13 on: April 05, 2011, 05:39:21 PM »
We like that!
Used Cooking Oil Collection website ... http://www.surreyusedcookingoilcollection.palmergroup.co.uk

Offline Tony

  • Administrator
  • Oil baron
  • *******
  • Posts: 5114
  • Fo' shizzle, biodizzle
    • Southampton Waste Oil Collection
  • Location: Southampton
Re: Added page on two stage processing
« Reply #14 on: April 06, 2011, 12:00:10 AM »
I'm surprised so much glycerol was present in the second stage sample - the few times I've done it before I've done stage two and just had a few spots of glycerol drop out, nothing like that much.