Author Topic: Readers ̶w̶i̶v̶e̶s̶ ̶ pumps. (Read 4839 times)

Julian · « **on:** June 09, 2013, 12:48:25 PM »

Trying to tidy the garage, so thought I'd do a pump line up while I was at it ...

With another three on the processor.

julianf · « **Reply #1 on:** June 09, 2013, 01:02:01 PM »

For some reason i thought your monos were mms, but theyre identical to mine.

I thought you had some leo units also?

Julian · « **Reply #2 on:** June 09, 2013, 01:19:25 PM »

As far as I'm aware, the only difference between an MM and an ML is the motor speed and hence the flow.

The Leo I have is one of the three fitted to the processor.

julianf · « **Reply #3 on:** June 09, 2013, 01:57:38 PM »

For some reason id always thought the MM was the stubby one...

It seems i assumed wrong... (i guess it was as i knew mine was an ML, so i just thought the 'other one' must be the MM!)

Julian · « **Reply #4 on:** June 09, 2013, 03:39:08 PM »

Nope, the stubby one is an MS, that's another of the three fitted to the processor.

Head Womble · « **Reply #5 on:** June 09, 2013, 09:05:33 PM »

Julian you have a pump problem.

Also with all these pumps to hand why are you still struggling with low flow Leo on your plant.

Jamesrl · « **Reply #6 on:** June 09, 2013, 09:53:11 PM »

Quote from: Head Womble on June 09, 2013, 09:05:33 PM

Julian you have a pump problem.

Also with all these pumps to hand why are you still struggling with low flow Leo on your plant.

And don't forget his 3 = 4hrs to demeth

Tony · « **Reply #7 on:** June 09, 2013, 09:55:15 PM »

Oooh I should line up the four Calpeda MXHMs, they're very shiny

Julian · « **Reply #8 on:** June 09, 2013, 09:56:37 PM »

I know, I know. When I get round to building my new processor ...

Head Womble · « **Reply #9 on:** June 09, 2013, 10:24:53 PM »

Quote from: Julian on June 09, 2013, 09:56:37 PM

I know, I know. When I get round to building my new processor ...

Spend a few hours improving the one you've got, bigger pump, less restrictive pipework ect ect,
then you'll either have time to build the new one or find you don't need it.

Head Womble · « **Reply #10 on:** June 09, 2013, 10:25:51 PM »

Quote from: Tony on June 09, 2013, 09:55:15 PM

Oooh I should line up the four Calpeda MXHMs, they're very shiny

Shiny you say, I need photos.

K.H · « **Reply #11 on:** June 09, 2013, 10:32:39 PM »

one of my overloaded shelves of crap

Jamesrl · « **Reply #12 on:** June 09, 2013, 10:47:34 PM »

What is it with men and pumps, Why do I buy 4 or 5 at a time just 'cause they're a bargain?

I had 7, YES 7 on one plant and loads of pumps just sitting on shelves.

Perhaps we have a gene similar to the female shoe Gene.

Soupstone · « **Reply #13 on:** June 10, 2013, 11:07:01 PM »

Theres 5 x tam 105's, 2 x B&Q's and a 110 LPM Italian jobbie in the garage just now.

knighty · « **Reply #14 on:** June 11, 2013, 03:09:31 PM »

I see your pumps and raise you a compressor tank

(ebay, drunk, don't ask)

Biopowered - vegetable oil and biodiesel forum

Biodiesel

Biodiesel equipment

Readers ̶w̶i̶v̶e̶s̶ ̶ pumps.