Author Topic: Yet another pumps thread (Read 198158 times)

Julian · « **Reply #690 on:** July 03, 2018, 12:13:52 PM »

Quote from: Tony on July 03, 2018, 10:38:13 AM

Anyone near Maryport fancy a big gear pump?

https://www.ebay.co.uk/itm/Rietschle-pump-lube-oil-transfer-WPB-25-20/183263706637

Comes with motor end of the coupling, just needs replacement motor.

Don't see gear pumps that size on eBay very often.

6000 l/m … that would take just over a second to fill my processor … don't think my reactions are quick enough to hit the stop switch in time!

knighty · « **Reply #691 on:** July 03, 2018, 10:43:59 PM »

first data plate says 1.1kw... that's not enough to shift that much?

second data plate says 21 cubic meters per hour, about 350litres/min... but also says 9.55kw (maybe 8.55?)

Tony · « **Reply #692 on:** July 04, 2018, 01:34:14 PM »

It is a "lube pump" so possibly designed for high flow but low pressure?

I did wonder if the flow rating was a mistake, or there was supposed to be a decimal point in there somewhere. The ports don't look anywhere big enough to pass 100 litres per second.

Tony · « **Reply #693 on:** February 25, 2019, 10:27:44 AM »

Decent Mono for £20 in Bury St Edmunds

https://www.ebay.co.uk/itm/202606681372

Biopowered - vegetable oil and biodiesel forum

Biodiesel

Biodiesel equipment

Yet another pumps thread