Author Topic: My new control panel (Read 7035 times)

Huntman40 · « **Reply #15 on:** April 06, 2013, 10:10:35 PM »

I dont demeth and my processor has a good seal and a vent pipe.
Im not going to loose any sleep over meth fumes, im confident of a good seal

Heat sinks get hot, better to keep them out of the way

Rotary-Motion · « **Reply #16 on:** April 07, 2013, 07:28:23 AM »

Quote from: Huntman40 on April 06, 2013, 03:09:58 PM

here are my tag writings, courtesy of K.H's handheld printer machine, thx kieth...

Rotary-Motion · « **Reply #17 on:** April 07, 2013, 07:30:13 AM »

for your fan use an old phone charger, 240 down to 5 or 7 volts...

could even use a battery, prolly last ages....

Huntman40 · « **Reply #18 on:** April 16, 2013, 11:08:57 PM »

in the end i decided to give one of these a try for the fan power. Im trying to think of a more sustainable source of transformers for more professional jobs.
http://www.ebay.co.uk/itm/370704254100?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

but in this case im doing as you said with a 9.5v somthing charger just plugged in outside the box

I was thinking of disassembling it but with its pending replacement i cheated and wired it externally.

kamaangir · « **Reply #19 on:** April 16, 2013, 11:47:34 PM »

why not use a 230v ac fan? You can get small ones 80mm or so?

This one is 120mm

http://www.rapidonline.com/electrical-power/adda-main-axial-fan-230v-sleeve-bearing-120mm-37-0972

Rotary-Motion · « **Reply #20 on:** April 17, 2013, 07:45:22 AM »

you would get that tranny in ya box...

Biopowered - vegetable oil and biodiesel forum

Biodiesel

Biodiesel equipment

My new control panel