Winter waxing

From Biopowered
Revision as of 19:19, 29 January 2011 by Bio-rich-time-poor (talk | contribs)
Jump to: navigation, search

High Melt Point Esters are Fatty Acid Methyl Esters with melt points above ambient - typically between 10°C to 40°C.

HMPEs are usually seen in winter as either suspended flakes in the biodiesel, or white/yellow cream at the bottom of drums. Adding petrol to a warm, melted mix does not prevent the HMPEs re-solidifying on cooling.

Treatment is by filtering out the solids at the ambient temperature the fuel will be used at, or Water Washing with cold water. The initial level of HMPEs in the produced fuel may also be reduced by doing a cold Water Prewash.

The presence of HMPEs in biodiesel is feedstock related, with processing method playing only a very minor part. Please note, there is some speculation that the Whole Batch Demeth method may produce more HMPEs than other methods although this is unconfirmed and needs further research before a final conclusion is reached.