Difference between revisions of "Pump - Tam 105"
(→Performance) |
(→Spares) |
||
| Line 58: | Line 58: | ||
Spares for this pump are readily available from the main stockists and distributors whose detail can be found on the internet | Spares for this pump are readily available from the main stockists and distributors whose detail can be found on the internet | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
[[File:Tam1051-1.jpg]] | [[File:Tam1051-1.jpg]] | ||
| − | + | [[File:Tam1051.jpg]] | |
| − | |||
| − | [[File:Tam1051.jpg]] | ||
| − | |||
| − | |||
Accessories | Accessories | ||
| − | Foot Valve Filter 7950561 | + | * Foot Valve Filter 7950561 |
| − | + | * BSP Spigot Hose Connector 7950210 | |
| − | BSP Spigot Hose Connector 7950210 | + | * I.D. Reinforced Hose for Suction and delivery 7955010 |
| − | + | * I.D. Layflat Hose for delivery only 7955110 | |
| − | I.D. Reinforced Hose for Suction and delivery 7955010 | + | * Fuse Rating - 5 Amps |
| − | |||
| − | I.D. Layflat Hose for delivery only 7955110 | ||
| − | |||
| − | |||
| − | Fuse Rating | ||
| − | |||
| − | |||
| − | |||
| − | |||
Revision as of 21:45, 11 December 2010
The TAM 105 1" centrifugal pump is the most popular pump for use in biodiesel processers but remember you are buying a pump that is marketed for clean water only,the figures below only apply to water but are good for comparisons.
TAM 105 specifications
- Motor 230V 50Hz 1ph
- Power 330Watts
- Current 1.4Amps
- Capacitor 8uF 450V
- Speed 2800rpm
- Max. Head 35M
- Max. Lift (Suction) 7M
- Bore Size 1”BSP
- Max. Output 40L/min
- Weight 7.2kg
- Part No. 7230350
Components
- Pump Body Cast Iron (Painted)
- Impellor Case Cast Iron (Painted)
- Impellor Case Seal NBR
- Motor Shaft Seal NBR
- Rotor / Gear / Impellor Brass
- Shaft Key / Nut Stainless Steel
- Motor Shaft Stainless
Performance
- Voltage / Frequency 230v / 50Hz
- kW 0.33
- Amps 1.4
- RPM 2800
- Duty Cycle Continuous
- Bypass Valve Y/N N
- Max Flow 40 lpm @ 0 m head
- Discharge Pressure 3.5 Bar / 50.75 PSI
- Max Suction Lift (Dry) None
- Max Suction Lift (Wet) 7 m
- Inlet Fitting 1" BSP
- Outlet Fitting 1" BSP
- Max Particle Tolerance 100 Micron
- Max Liquid Temp 90 Celcius
- Max Room Temp 40 Celcius
- Thermal Protection Y/N Y
- Max Liquid Viscosity Water
- Ingress Protection IP44
Spares
Spares for this pump are readily available from the main stockists and distributors whose detail can be found on the internet
Accessories
- Foot Valve Filter 7950561
- BSP Spigot Hose Connector 7950210
- I.D. Reinforced Hose for Suction and delivery 7955010
- I.D. Layflat Hose for delivery only 7955110
- Fuse Rating - 5 Amps
KH 19:35, 11 December 2010 (UTC)
