Pump - Tam 105

TAM 105 centrifugal pump

The TAM 105 1" centrifugal pump is the most popular pump for use in biodiesel processers but remember you are buying a pump that is marketed for clean water only,the figures below only apply to water but are good for comparisons.

TAM 105 specifications

• Motor 230V 50Hz 1ph
• Power 330Watts
• Current 1.4Amps
• Capacitor 8uF 450V
• Speed 2800rpm
• Max. Head 35M
• Max. Lift (Suction) 7M
• Bore Size 1”BSP
• Max. Output 40L/min
• Weight 7.2kg
• Part No. 7230350

Components

• Pump Body Cast Iron (Painted)
• Impellor Case Cast Iron (Painted)
• Impellor Case Seal NBR
• Motor Shaft Seal NBR
• Rotor / Gear / Impellor Brass
• Shaft Key / Nut Stainless Steel
• Motor Shaft Stainless

Performance

Voltage / Frequency 230v / 50Hz

kW 0.33

Amps 1.4

RPM 2800

Duty Cycle Continuous

Bypass Valve Y/N N

Max Flow 40 lpm @ 0 m head

Discharge Pressure 3.5 Bar / 50.75 PSI

Max Suction Lift (Dry) None

Max Suction Lift (Wet) 7 m

Inlet Fitting 1" BSP

Outlet Fitting 1" BSP

Max Particle Tolerance 100 Micron

Max Liquid Temp 90 Celcius

Max Room Temp 40 Celcius

Thermal Protection Y/N Y

Max Liquid Viscosity Water

Ingress Protection IP44

Spares

Spares for this pump are readily available from the main stockists and distributors whose detail can be found on the internet

Accessories

Foot Valve Filter 7950561

BSP Spigot Hose Connector 7950210

I.D. Reinforced Hose for Suction and delivery 7955010

I.D. Layflat Hose for delivery only 7955110

Fuse Rating

The fuse in the plug must be rated as follows:

TAM 105 ......... 5 Amps

KH 19:35, 11 December 2010 (UTC)