Difference between revisions of "Pump - Tam 105"
| Line 96: | Line 96: | ||
| − | + | Spares for this pump are readily available from the main stockists and distributors whose detail can be found on the internet | |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| Line 137: | Line 131: | ||
| − | [[Category: ]] | + | [[User:KH|KH]] 19:35, 11 December 2010 (UTC)[[Category:biodiesel ]] |
Revision as of 20:35, 11 December 2010
The TAM 105 1" centrifugal pump is the most popular pump for use in biodiesel processers but remember you are buying a pump that is marketed for clean water only,the figures below only apply to water but are good for comparisons.
TAM 105 specifications
- Motor 230V 50Hz 1ph
- Power 330Watts
- Current 1.4Amps
- Capacitor 8uF 450V
- Speed 2800rpm
- Max. Head 35M
- Max. Lift (Suction) 7M
- Bore Size 1”BSP
- Max. Output 40L/min
- Weight 7.2kg
- Part No. 7230350
Components
Pump Body Cast Iron (Painted)
Impellor Case Cast Iron (Painted)
Impellor Case Seal NBR
Motor Shaft Seal NBR
Rotor / Gear / Impellor Brass
Shaft Key / Nut Stainless Steel
Motor Shaft Stainless
Performance
Voltage / Frequency 230v / 50Hz
kW 0.33
Amps 1.4
RPM 2800
Duty Cycle Continuous
Bypass Valve Y/N N
Max Flow 40 lpm @ 0 m head
Discharge Pressure 3.5 Bar / 50.75 PSI
Max Suction Lift (Dry) None
Max Suction Lift (Wet) 7 m
Inlet Fitting 1" BSP
Outlet Fitting 1" BSP
Max Particle Tolerance 100 Micron
Max Liquid Temp 90 Celcius
Max Room Temp 40 Celcius
Thermal Protection Y/N Y
Max Liquid Viscosity Water
Ingress Protection IP44
Spares
Spares for this pump are readily available from the main stockists and distributors whose detail can be found on the internet
Accessories
Foot Valve Filter 7950561
BSP Spigot Hose Connector 7950210
I.D. Reinforced Hose for Suction and delivery 7955010
I.D. Layflat Hose for delivery only 7955110
Fuse Rating
The fuse in the plug must be rated as follows:
TAM 105 ......... 5 Amps
KH 19:35, 11 December 2010 (UTC)
