Difference between revisions of "Processor - with pre-heat / drying tank"

From Biopowered
Jump to: navigation, search
Line 9: Line 9:
 
Whilst DIY designs are fine for one's own garage or garden shed, where no other person is involved than one's self, an industrial design needs to take more consideration in terms of the risk of accident and needs to be generally more robust and intrinsically safe. Methanol itself is an extremely hazardous chemical and is both highly toxic and inflammable. Methanol fumes are also highly explosive. In an industrial application it is important to minimise the risk to other people and their property in the nearby vacinity.
 
Whilst DIY designs are fine for one's own garage or garden shed, where no other person is involved than one's self, an industrial design needs to take more consideration in terms of the risk of accident and needs to be generally more robust and intrinsically safe. Methanol itself is an extremely hazardous chemical and is both highly toxic and inflammable. Methanol fumes are also highly explosive. In an industrial application it is important to minimise the risk to other people and their property in the nearby vacinity.
  
<gallery caption="Goat Industries Mixer" widths="600px" heights="717px" perrow="2">
+
<gallery caption="Goat Industries Mixer" widths="600px" heights="717px" perrow="2">File:TT700A 01.jpg|
File:TT700A 01.jpg
+
This machine features a heavy duty construction that is suitable for industrial use. </gallery>
|This machine features a heavy duty construction that is suitable for industrial use. The main shaft is of such a diameter that it does not vibrate or wobble during operation and the bearings are mounted on heavy steel plate and supported by a hefty gusset (not shown). When in use, the blades, being well supported, will not run the risk of scraping against the side of the container and producing sparks. Also, there is an oil bath to prevent sparks from a semi-siezed up bearing from entering the internals of the vessel.
 
File:Methoxide mixer 01 small.jpg |The photograph shows the valves and tappings needed for efficient use of the machine. The top right valve is positioned to allow a large funnel to be attached, into which the caustic granules are poured. At the very bottom is the main outlet and above that is a sample point for testing the strength of the mix. The main tank is fabricated out of mild steel as this is not 'attacked' by the caustic mix. The mix will attack most plastics and plastic tanks will become hard and brittle and will, in time, fail.
 
</gallery>
 
  
  
 
[[Category:Commercial]]
 
[[Category:Commercial]]
 
[[Category:Biodiesel Processors]]
 
[[Category:Biodiesel Processors]]

Revision as of 18:07, 30 November 2010

Paddy's text here File:TT700A 01.jpg The Twyn Tub or 'TT' range of processors from Goat Industriesare an industrial type of design that produces biodiesel to the European standard, EN14214. The process starts off in the left hand tank, that has heating elements inserted and the main reaction takes place in the right hand tank, which is compltely free of any electrical items. The plant was designed to be as safe as reasonly possible without using extortionately expensive components and isolating the reaction stage of the process was found to be the most cost effective way of doing this.


This design is intended for use with a Goat Industries Biodiesel Processor and is suitable for industrial installations where health and safety is a major concern.

Whilst DIY designs are fine for one's own garage or garden shed, where no other person is involved than one's self, an industrial design needs to take more consideration in terms of the risk of accident and needs to be generally more robust and intrinsically safe. Methanol itself is an extremely hazardous chemical and is both highly toxic and inflammable. Methanol fumes are also highly explosive. In an industrial application it is important to minimise the risk to other people and their property in the nearby vacinity.