Difference between revisions of "Catalyst"

From Biopowered
Jump to: navigation, search
 
(15 intermediate revisions by 3 users not shown)
Line 1: Line 1:
==Catalysts==
+
<metadesc>Biodiesel catalysts, Sodium Hydroxide, NaOH, Potassium Hydroxide,  KOH, Sodium Methylate, NaOCH3</metadesc>
Sodium Hydroxide and Potassium Hydroxide are popular catalysts for home biodiesel production.  They are mixed with [[Methanol]] to form a [[Methoxide]].
+
[[File:NaoH burn - e3msb.jpg|250px|thumb|right|Burns as a result of NaOH falling inside a rigger boot. Source: e3msb.]]
Sodium Methylate is mentioned for information only , it is not recommended for home production.
+
[[Sodium hydroxide]] and [[potassium hydroxide]] are popular catalysts for home biodiesel production.  They are mixed with [[methanol]] to form a [[methoxide]].
 +
Alternatively, [[anhydrous sodium methylate]] may be diluted to the correct strength with methanol.
  
==Sodium Hydroxide (NaOH)==
+
 
 +
__TOC__
 +
 
 +
 
 +
 
 +
==Sodium hydroxide (NaOH)==
 
* inexpensive
 
* inexpensive
* harder to dissolve into solution with Methanol
+
* harder to dissolve into solution with methanol
* solid [[Glycerol]] by-product
+
* solid [[glycerol]] by-product
 
* accurate titration required to avoid making excess soap
 
* accurate titration required to avoid making excess soap
* soaps will settle quicker than Potassium
+
* soaps will settle quicker than potassium
 
* come in pearls which are less likely to become airborne unlike flakes.
 
* come in pearls which are less likely to become airborne unlike flakes.
  
==Potassium Hydroxide (KOH)==
+
 
 +
 
 +
==Potassium hydroxide (KOH)==
 
* more costly
 
* more costly
* easy to dissolve into solution with Methanol
+
* easy to dissolve into solution with methanol
 
* come in flakes which can become airborne, ensure you use face protection.
 
* come in flakes which can become airborne, ensure you use face protection.
* liquid [[Glycerol]] by-product
+
* liquid glycerol by-product
 
* forgiving with inaccurate titrations
 
* forgiving with inaccurate titrations
  
==Sodium Methylate (NaOCH3)==
+
 
* pre-mixed catalyst in methanol (25%,30%,32% by weight)
+
 
* very costly around 4 x the cost of mixing (Sodium Hydroxide and Methnaol)
+
==Anhydrous sodium methylate==
* no water present therefore no soaps produced.
+
* around 4 x the cost of mixing (sodium hydroxide and methanol)
* very dangerous, used for large scale production when the effect on yield make it cost effective.
+
* pre-mixed catalyst in methanol (25%, 30%, 32% by weight)
* not for home production use.
+
* easily diluted to the correct strength in methanol
 +
* no water present, therefore no soaps produced
 +
* very dangerous, used for large scale production when the effect on yield make it cost effective
 +
 
 +
 
  
 
==Storage and handling==
 
==Storage and handling==
Both Potassium Hydroxide and Sodium Hydroxide catalysts should be kept in a dry, sealed airtight container, If left exposed the catalyst will absorb moisture and Carbon Dioxide from the atmosphere and weaken the catalyst. Ensure it is kept away from animals and out of the reach of children.
+
Both potassium hydroxide and sodium hydroxide catalysts should be kept in a dry, sealed airtight container, If left exposed the catalyst will absorb moisture and carbon dioxide from the atmosphere and weaken the catalyst. Ensure it is kept away from animals and out of the reach of children.
  
 
Protective gloves and eye equipment must be worn during handling, as both are strong bases and will dissolve flesh into soap.
 
Protective gloves and eye equipment must be worn during handling, as both are strong bases and will dissolve flesh into soap.
  
 
Care should be taken with "flake" products to avoid inhalation.
 
Care should be taken with "flake" products to avoid inhalation.
 +
 +
 +
 +
==See also==
 +
 +
* [[MSDS - Potassium Hydroxide ]]
 +
* [[MSDS - Sodium Hydroxide ]]
  
 
[[Category:Biodiesel]]
 
[[Category:Biodiesel]]
 +
[[Category:Chemicals]]

Latest revision as of 11:31, 10 March 2013

Burns as a result of NaOH falling inside a rigger boot. Source: e3msb.

Sodium hydroxide and potassium hydroxide are popular catalysts for home biodiesel production. They are mixed with methanol to form a methoxide. Alternatively, anhydrous sodium methylate may be diluted to the correct strength with methanol.



Sodium hydroxide (NaOH)

  • inexpensive
  • harder to dissolve into solution with methanol
  • solid glycerol by-product
  • accurate titration required to avoid making excess soap
  • soaps will settle quicker than potassium
  • come in pearls which are less likely to become airborne unlike flakes.


Potassium hydroxide (KOH)

  • more costly
  • easy to dissolve into solution with methanol
  • come in flakes which can become airborne, ensure you use face protection.
  • liquid glycerol by-product
  • forgiving with inaccurate titrations


Anhydrous sodium methylate

  • around 4 x the cost of mixing (sodium hydroxide and methanol)
  • pre-mixed catalyst in methanol (25%, 30%, 32% by weight)
  • easily diluted to the correct strength in methanol
  • no water present, therefore no soaps produced
  • very dangerous, used for large scale production when the effect on yield make it cost effective


Storage and handling

Both potassium hydroxide and sodium hydroxide catalysts should be kept in a dry, sealed airtight container, If left exposed the catalyst will absorb moisture and carbon dioxide from the atmosphere and weaken the catalyst. Ensure it is kept away from animals and out of the reach of children.

Protective gloves and eye equipment must be worn during handling, as both are strong bases and will dissolve flesh into soap.

Care should be taken with "flake" products to avoid inhalation.


See also