Author Topic: MOVING SERVERS TODAY  (Read 16669 times)

Offline therecklessengineer

  • Administrator
  • Oil obsessive
  • *****
  • Posts: 648
Re: MOVING SERVERS TODAY
« Reply #45 on: July 04, 2013, 12:32:09 AM »
You can get them in USB form - although you've probably considered that already.

You have a PM btw.

Offline Tony

  • Administrator
  • Oil baron
  • *******
  • Posts: 5110
  • Fo' shizzle, biodizzle
    • Southampton Waste Oil Collection
  • Location: Southampton
Re: MOVING SERVERS TODAY
« Reply #46 on: July 04, 2013, 09:59:04 AM »
You can get them in USB form - although you've probably considered that already.

I've got a single channel usb capture device (though I see 4 ch is available).  But it was a royal pain to get working - I had to build a kernel module from experimental source, and modify the source to get it to work.  With every kernel upgrade then it has to be rebuilt - a royal pain.  And it didn't work very well with zoneminder.  The PCI card is the easy option - supported by the kernel and works with zoneminder out of the box.

Offline julianf

  • Wiki Editor
  • Grand Gunge Master
  • ******
  • Posts: 1388
  • Location: Devon
Re: MOVING SERVERS TODAY
« Reply #47 on: July 04, 2013, 10:23:10 AM »
Ive been meaning to buy a jetway j7f2 for ages, but not gotten around to it.

Its only 1.2ghz, but check the power stats on it : )
For custom cnc cut instrument panels, see - http://www.thebeast.co.uk

Collections website - http://www.devon-used-cooking-oil-collection.co.uk

Offline Tony

  • Administrator
  • Oil baron
  • *******
  • Posts: 5110
  • Fo' shizzle, biodizzle
    • Southampton Waste Oil Collection
  • Location: Southampton
Re: MOVING SERVERS TODAY
« Reply #48 on: July 08, 2013, 02:17:20 PM »
FTTC install complete, entertainingly some of the speed testers it's off the top of the gauges.  Synced at 78mbps down and 20mbps up :)