Author Topic: Home made tools web site  (Read 10117 times)

Offline K.H

  • Administrator
  • Oil baron
  • *******
  • Posts: 2353
  • Location: Tosser towers

Offline Julian

  • Administrator
  • Oil baron
  • *******
  • Posts: 6377
    • Used Cooking Oil Collection website
  • Location: East Surrey, UK.
Re: Home made tools web site
« Reply #1 on: May 05, 2013, 09:36:08 AM »
http://www.homemadetools.net/category/automotive?utm_expid=57824293-1&utm_referrer=http%3A%2F%2Fwww.homemadetools.net%2F

 Really excellent website, bet you've spent hours on there.

You posted only the automotive section though, there are many others here ... http://www.homemadetools.net/?gce=ttrig15&utm_expid=57824293-1

Rather reminds me of old Popular Mechanics magazines.  I have a couple dating back to the 30s and 40s and they are stuffed full of ideas like this, makes fascinating interesting reading.

Used Cooking Oil Collection website ... http://www.surreyusedcookingoilcollection.palmergroup.co.uk

Offline julianf

  • Wiki Editor
  • Grand Gunge Master
  • ******
  • Posts: 1388
  • Location: Devon
Re: Home made tools web site
« Reply #2 on: May 05, 2013, 10:00:34 AM »
Im liking the look of this one -

http://www.homemadetools.net/acid-rust-bath?gce=ttrig15&utm_expid=57824293-1&utm_referrer=http%3A%2F%2Fwww.homemadetools.net%2Fbandsaw-wheel-brush%3Fgce%3Dttrig15

its a pity that the links on some of the items are dead.  Would have been nice if they had have cached them.
For custom cnc cut instrument panels, see - http://www.thebeast.co.uk

Collections website - http://www.devon-used-cooking-oil-collection.co.uk

Offline photoman290

  • Wiki Editor
  • Oil obsessive
  • *****
  • Posts: 803
  • Location: west cornwall
Re: Home made tools web site
« Reply #3 on: May 05, 2013, 04:50:01 PM »
Im liking the look of this one -

http://www.homemadetools.net/acid-rust-bath?gce=ttrig15&utm_expid=57824293-1&utm_referrer=http%3A%2F%2Fwww.homemadetools.net%2Fbandsaw-wheel-brush%3Fgce%3Dttrig15

its a pity that the links on some of the items are dead.  Would have been nice if they had have cached them.

thats a good one. now i can have derusted unidentified bits of scrap iron.

Offline Julian

  • Administrator
  • Oil baron
  • *******
  • Posts: 6377
    • Used Cooking Oil Collection website
  • Location: East Surrey, UK.
Re: Home made tools web site
« Reply #4 on: May 05, 2013, 05:53:59 PM »
I've been looking at this ...  http://woodgears.ca/reader/alois/press.html and thinking about glogs.

Strangely Keith's site links to the woodgears site which I flagged up with the gimbal mounted router a little while back ... small internet (as the saying almost goes!)
Used Cooking Oil Collection website ... http://www.surreyusedcookingoilcollection.palmergroup.co.uk

Offline Tony

  • Administrator
  • Oil baron
  • *******
  • Posts: 5104
  • Fo' shizzle, biodizzle
    • Southampton Waste Oil Collection
  • Location: Southampton
Re: Home made tools web site
« Reply #5 on: May 05, 2013, 09:14:32 PM »
I've been looking at this ...  http://woodgears.ca/reader/alois/press.html and thinking about glogs.

Strangely Keith's site links to the woodgears site which I flagged up with the gimbal mounted router a little while back ... small internet (as the saying almost goes!)

That is very cool.  I'd love the time (and workshop space) to build a decent glyc log maker :)

Offline julianf

  • Wiki Editor
  • Grand Gunge Master
  • ******
  • Posts: 1388
  • Location: Devon
Re: Home made tools web site
« Reply #6 on: May 05, 2013, 09:32:24 PM »
2nd'd -

A local mill will give me as much sawdust as i can take (they load dumpy bags onto my trailer with a forklift!)

Next winter i dont intend to be using the bio-boiler much at all!
For custom cnc cut instrument panels, see - http://www.thebeast.co.uk

Collections website - http://www.devon-used-cooking-oil-collection.co.uk

Offline Julian

  • Administrator
  • Oil baron
  • *******
  • Posts: 6377
    • Used Cooking Oil Collection website
  • Location: East Surrey, UK.
Re: Home made tools web site
« Reply #7 on: May 05, 2013, 10:19:10 PM »
I've been looking at this ...  http://woodgears.ca/reader/alois/press.html and thinking about glogs.

Strangely Keith's site links to the woodgears site which I flagged up with the gimbal mounted router a little while back ... small internet (as the saying almost goes!)

That is very cool.  I'd love the time (and workshop space) to build a decent glyc log maker :)

Dont wish too hard, see ... http://www.biopowered.co.uk/forum/index.php/topic,1233.new.html#new
Used Cooking Oil Collection website ... http://www.surreyusedcookingoilcollection.palmergroup.co.uk

Offline Julian

  • Administrator
  • Oil baron
  • *******
  • Posts: 6377
    • Used Cooking Oil Collection website
  • Location: East Surrey, UK.
Re: Home made tools web site
« Reply #8 on: May 05, 2013, 11:09:10 PM »
God, there are some great ideas on that site.

This one ... http://www.tantel.ca/Sand%20Blaster.html  shows a sand blasting cabinet similar to the the one KH made and posted on the VOD, but this chaps idea is to use an old liferaft canister.

Perhaps a little bigger than most people would need but most of the hard work is already done for you ... brilliant!
Used Cooking Oil Collection website ... http://www.surreyusedcookingoilcollection.palmergroup.co.uk

Offline greasemonkey

  • Wiki Editor
  • Grand Gunge Master
  • ******
  • Posts: 1765
  • Location: Breconshire
Re: Home made tools web site
« Reply #9 on: May 06, 2013, 12:05:54 AM »
I wish I had some of these handy when some scallywag pulled my car out the way with his tractor and parked his dirty great trailer outside my house.

http://www.homemadetools.net/tire-deflators
http://vegoilcollection.weebly.com/

I Is An Oily Lickle Chimp.

Offline knighty

  • Wiki Editor
  • Oil obsessive
  • *****
  • Posts: 531
  • Location: Sunderland, UK
Re: Home made tools web site
« Reply #10 on: May 06, 2013, 02:37:14 AM »
some good stuff on there

This one ... http://www.tantel.ca/Sand%20Blaster.html  shows a sand blasting cabinet similar to the the one KH made and posted on the VOD, but this chaps idea is to use an old liferaft canister.
Perhaps a little bigger than most people would need but most of the hard work is already done for you ... brilliant!

I've been looking at sandblasting cabinets for a while, but... the decent ones seam to go for a fortune, I only want one for a few bits when I restore my camper van

there's a few with bits missing... but not knowing how they're made I'm not sure what's missing....

when the shot falls down into the bottom of the cabinet, and is sucked back up to blow around again... anyone know how it's filtered out from the bits of rust etc.. ?

Offline Head Womble

  • Wiki Editor
  • Oil baron
  • *******
  • Posts: 2071
  • I like shiny things
  • Location: Heathrow area
Re: Home made tools web site
« Reply #11 on: May 06, 2013, 06:55:44 AM »

when the shot falls down into the bottom of the cabinet, and is sucked back up to blow around again... anyone know how it's filtered out from the bits of rust etc.. ?

It's not, well the fine particles are drawn out in the dust extraction, but the larger bits get cycled around with the shot.
Or that's how the one I used to operate worked, but that was a proper industrial one, 5m x 4m, self loading using screw feeds in the floor, you didn't just put your hands in, you stood inside it !
Skoda Yeti L&K 2L TDI 150 CR DPF Adblue
VW Touran 1.6tdi DSG.
Both running pimp diesel.

Offline homemadetools

  • Barrel scraper
  • *
  • Posts: 3
  • Location: Colorado
Re: Home made tools web site
« Reply #12 on: August 29, 2015, 05:10:46 PM »
Jon here from HomemadeTools.net.

I know this thread is an old one, but thanks for the kind words :)

To celebrate our 20,000th homemade tool, we made a new ebook featuring our top 50 homemade tools. You guys are welcome to it for free:

http://download.homemadetools.net/50MustReadTools.pdf


Offline Julian

  • Administrator
  • Oil baron
  • *******
  • Posts: 6377
    • Used Cooking Oil Collection website
  • Location: East Surrey, UK.
Re: Home made tools web site
« Reply #13 on: August 29, 2015, 07:16:02 PM »
Jon, many thanks for that, I'm sure it will be closely scrutinised by many members.

Congratulations on your 20,000th entry and on running such a great site ... keep up the good work.

« Last Edit: August 29, 2015, 09:20:42 PM by Julian »
Used Cooking Oil Collection website ... http://www.surreyusedcookingoilcollection.palmergroup.co.uk

Offline dgs

  • Wiki Editor
  • Grand Gunge Master
  • ******
  • Posts: 1304
  • Location: york
Re: Home made tools web site
« Reply #14 on: August 30, 2015, 12:26:05 PM »
Hi Jon, Thanks for the comments. It would be nice to see you getting into a bit of bio making, I'm sure it would lead to some extra pieces of equipment being made that none of us have thought of.
FOC water tests by Sandy brae or Karl Fischer for forum members.