Author Topic: Metal paint @ Aldi (Read 6003 times)

Tony · « **on:** April 12, 2013, 08:24:17 PM »

Before I forget, 1l of metal paint is currently £4.99 in Aldi, including black.

Claims two coat for protection, no primer required. According to historical posts on the MIG welding forum it's way better than Hammerite.

Actually thinking of going back and buying more having read the reviews!

nigelb · « **Reply #1 on:** April 12, 2013, 10:53:50 PM »

How many have you bought?

Tony · « **Reply #2 on:** April 12, 2013, 10:59:43 PM »

Just the one - though I'm wondering how far 1l will go over two coats? The can says 13.5m2 as a single coat, two coats required so I'd say three to be sure (4.5 sq.m)?

nigelb · « **Reply #3 on:** April 12, 2013, 11:00:48 PM »

Where do plan on using it...anywhere specific?

Tony · « **Reply #4 on:** April 12, 2013, 11:02:39 PM »

Pipework, legs and welding on the new processor built. It's a 500l steel tank so a fair area to start with.

julianf · « **Reply #5 on:** April 13, 2013, 08:38:42 AM »

I think i read a post from glycerides reporting that he had painted his processor in hammerite, but that it was NOT bio stable.

Glycer-rides · « **Reply #6 on:** April 13, 2013, 08:52:10 PM »

Quote from: julianf on April 13, 2013, 08:38:42 AM

I think i read a post from glycerides reporting that he had painted his processor in hammerite, but that it was NOT bio stable.

You are correct, Julian. It bubbles up as if coated with the old 'full fat' Nitromors.

On my 220L tank I used less than two small tins, ~ 375 mL.

Tony · « **Reply #7 on:** August 23, 2013, 07:41:54 PM »

Well it's back in Aldi on Sunday, I think the stuff is absolute genius, and very good value. No idea on the WVO/bio resistance but it's impossible to beat price-wise for metal protection.

https://www.aldi.co.uk/en/specialbuys/sunday-specialbuys-25th-august/product-detail/ps/p/metal-care-paint/

I shall be stocking up, that's for sure.

Julian · « **Reply #8 on:** August 23, 2013, 07:51:39 PM »

Oh Tony, why did you post that up ... I just looked at the page and then clicked Sundays special buys.

They are offering an inspection camera endoscope type for £70, Dilemma ... should I get one or not?

K.H · « **Reply #9 on:** August 23, 2013, 08:21:21 PM »

Bollocks, that's discs, paint and seals i've got to buy now!

julianf · « **Reply #10 on:** August 23, 2013, 08:49:36 PM »

Will be getting some for sure - just been plumbing in the rayburn with black iron pipe, and our trailer is brown'er than it was when we bought it!

Tony · « **Reply #11 on:** August 23, 2013, 09:22:49 PM »

I'll be picking up some of the cutting/sanding discs too.

Julian I'm sure you really don't need to be looking up there, just stick with being a pumpophile!

K.H · « **Reply #12 on:** August 25, 2013, 09:56:54 PM »

£72 that visit cost me!

K.H · « **Reply #13 on:** September 02, 2013, 08:06:16 PM »

Not impressed with the black, very thin

Rotary-Motion · « **Reply #14 on:** September 02, 2013, 09:33:05 PM »

Quote from: K.H on August 25, 2013, 09:56:54 PM

£72 that visit cost me!

shit

Biopowered - vegetable oil and biodiesel forum

General

Chatter

Metal paint @ Aldi