had a mooch round the scrapyard today...

[Dickjotec]

The burner is an electo oil.

Dick - i cant recall what you said last time we spoke, but that burner would be good for you.  Its possibly bust, but theyre fixable with some effort.

J
I have got a Worcester  Danesmore with a suitable, I think, burner but it would be useful to have that to play with. I will be getting it going for heat in the spring as the grid tie has packed up and is not cost effective to fix (pma and possibly GTI fail) will be using it for heat though in the short term. We are probably going to pv for the electric we think

So RM if you are going there for others, don't make a special journey, then I would be interested in that at scrap price, about £5? Tempted by the Lister pump as well but got enough projects on the go.

[julianf]

I have a petrol powered mono MM which has the same pump bit as the mono in the photos.

RM's photo is an MS.  The MM and ML are bigger and have the suction and discharge on the center line of the pump.

You are, of course, correct  : )

Its the one in the photo that i have though - i just got the letters wrong.

[Rotary-Motion]

ok if the pump and kerosene thing are about a fiver each I will get them...

as the pump as Julian mentioned could be burnt out so basically it is scrap to me and I will get lumbered with it but will gamble a fiver... dick wants his whatever so all good there.

will try get pump going...

[Rotary-Motion]

the oppo not the main man wanted 20 quid each so I told him to shovel um where the sun don't shine...

apparanty they can get that scrap there in the smash um up box to get the copper and cast and bushes out to get full weigh in price for them...

well I tried folks... working or not isn't important to them...

[Dickjotec]

Thanks for trying RM. I doubt they will get that for them even smashed up.

[GedsJeep]

thanks for trying and thanks for thinking of me peoples.