Author Topic: One i made earlier (Read 2400 times)

Rotary-Motion · « **on:** April 17, 2013, 08:22:03 AM »

made one of these yesterday cos i was bored, the center rail slides up and down to suit all shape canvasses wit a wing nut bolt, made for a girl who paints and draws and tea shirt design artist...

i should be finishing me van really hehe

enjoy

can also be used for veg charts

Tony · « **Reply #1 on:** April 17, 2013, 08:49:22 AM »

Very nice.

I see you also collect tyres, like me!

Dickjotec · « **Reply #2 on:** April 17, 2013, 01:54:45 PM »

Nice job hope she likes it

Rotary-Motion · « **Reply #3 on:** April 17, 2013, 08:22:52 PM »

yes those 2 are expensive commercial 8 ply for me van matching, there are 4x for me car out of picture shot

yes dick she loved it, also a little birdy told me you may be bathing outside this year

and i still gt the secondary pump if you need it

Julian · « **Reply #4 on:** April 17, 2013, 08:44:37 PM »

Very impressive ... so you're a bit of a wood worker then?

Have a look at this machine, the guy built himself ...

http://www.youtube.com/watch?v=PDPrFJazD3Q&list=SP7A1D94FF4FF10854&index=1

and if you like that have a look at his other videos, all good stuff.

Tony · « **Reply #5 on:** April 17, 2013, 08:51:03 PM »

My father used to teach woodwork at college. Some of the things he could make were incredible. Dovetail joints all linked together with a surface like glass - I'm sure his handmade cabinets and equipment drawers are worth a few quid.

Rotary-Motion · « **Reply #6 on:** April 17, 2013, 08:52:17 PM »

very very clever

Dickjotec · « **Reply #7 on:** April 17, 2013, 11:34:25 PM »

Quote from: Confucius on April 17, 2013, 08:22:52 PM

yes those 2 are expensive commercial 8 ply for me van matching, there are 4x for me car out of picture shot

yes dick she loved it, also a little birdy told me you may be bathing outside this year and i still gt the secondary pump if you need it

I'll trade it for the bit in the engine shed. Tell C I got it off the trailer, getting it I to place on Saturday, all being well!

Rotary-Motion · « **Reply #8 on:** April 18, 2013, 05:52:38 AM »

Quote from: Dickjotec on April 17, 2013, 11:34:25 PM

Quote from: Confucius on April 17, 2013, 08:22:52 PM
yes those 2 are expensive commercial 8 ply for me van matching, there are 4x for me car out of picture shot

yes dick she loved it, also a little birdy told me you may be bathing outside this year and i still gt the secondary pump if you need it

I'll trade it for the bit in the engine shed. Tell C I got it off the trailer, getting it I to place on Saturday, all being well!

? lost me there, bit in shed, but yes its yours free the pump...

Dickjotec · « **Reply #9 on:** April 18, 2013, 08:13:11 AM »

Bit in shed ===== sine wave inverter!

Rotary-Motion · « **Reply #10 on:** April 18, 2013, 06:50:35 PM »

oh yes hehe, its a deal....

hows that new strip and rebuild coming dick?

Dickjotec · « **Reply #11 on:** April 18, 2013, 08:18:12 PM »

Almost past the dirty parts. Going to paint the bunker on Sunday. Still awaiting the parts from Ireland but "billy"is now almost ready to receive them. I have made a new coolant tank as the old one had developed a rust hole. I have had to spend time making the base for the HT so we can get it in place on Saturday. I may fill it on Sunday to test for leaks, daughter has got to clean it first though!!!

Biopowered - vegetable oil and biodiesel forum

General

Chatter

One i made earlier