Biopowered - vegetable oil and biodiesel forum
General => Chatter => Topic started by: Head Womble on December 20, 2012, 09:12:56 PM
-
Thought I'd post this up for anyone that may need one
http://www.ebay.co.uk/sch/i.html?_trksid=p5197.m570.l1313&_nkw=2+1%2F4%22+bsp+boss&_sacat=0&_from=R40
-
anyone we know?
-
No, he posted once on VOD, but only to give the ebay item number.
They're big enough to cut in half to make two, so £9 each inc p&p.
-
Not too bad a price that Mark. I have a spare 316 stainless jobby here if anybody one needs one. Got them cheap off the bay last year.
-
Stainless isn't easy to weld to steel or I'd have that off you (if all goes well I'll be getting a 475L steel tank in the new year).
I know you can use dissimilar rods but I can get a steel boss miged on for a small drink.
-
Stainless isn't easy to weld to steel or I'd have that off you (if all goes well I'll be getting a 475L steel tank in the new year).
I know you can use dissimilar rods but I can get a steel boss miged on for a small drink.
you can mig stainless to mild no problem at all. I allways mig stainless repairs into cars, also some stainless browser tanks we do have mild cradles mig welded on.
-
Thanks bertle.
Welcome to the wiki and wiki forum.
Nige, is your boss big enough to cut in two ?
-
If they are the ones I think they are then probably not, they're more like stainless back nuts
-
Thanks bertle.
Welcome to the wiki and wiki forum.
Nige, is your boss big enough to cut in two ?
No...they are ready to weld but not cuttable.. They are like back nuts as Tony suggested. Send me your email and I'll send a picture
-
anyone we know?
If it's who I think it is, I met him early summer. He came down in the black beamer. He was having some issues, but his fuel was not fully reacted or properly washed (not clear 50/50). Nice guy, talked him through two staging and some other processes.
Again if it's the same guy, the last time I heard, his beamer was fine but he had bought his wife a mini cooper D and had problems with limp mode and engine management light. Which made me (even) more paranoid when I got my mini.
-
No, he posted once on VOD, but only to give the ebay item number.
They're big enough to cut in half to make two, so £9 each inc p&p.
When i tried charging £9 odd for those i had made there was collective heart failure on the VOD :(
-
No, he posted once on VOD, but only to give the ebay item number.
They're big enough to cut in half to make two, so £9 each inc p&p.
When i tried charging £9 odd for those i had made there was collective heart failure on the VOD :(
we are talking VOD real world prices thats not bad
-
No, he posted once on VOD, but only to give the ebay item number.
They're big enough to cut in half to make two, so £9 each inc p&p.
When i tried charging £9 odd for those i had made there was collective heart failure on the VOD :(
There are far too many people on the VOD who squeek when they walk. They know the price of everything and the value of nothing.
-
No, he posted once on VOD, but only to give the ebay item number.
They're big enough to cut in half to make two, so £9 each inc p&p.
When i tried charging £9 odd for those i had made there was collective heart failure on the VOD :(
There are far too many people on the VOD who squeek when they walk. They know the price of everything and the value of nothing.
I am one of those squeakers, but I will spend £ if I really need to or see a reasonable benefit.
-
not even going to list what the van has cost me 8)
its a hobby to me aswell as a project and a very useful tool, which i plan to get many hours of fun out of...
;D