Biopowered - vegetable oil and biodiesel forum

General => Wiki and forum discussion => Topic started by: nigelb on December 17, 2010, 06:00:48 PM

Title: Soap tests
Post by: nigelb on December 17, 2010, 06:00:48 PM

Hi guys,
having completed the soap test pages I am now looking for another subject to tackle. If nobody is currently working on it may I take the 2 stage process?

Nige

Title: Re: Soap tests
Post by: Julian on December 17, 2010, 06:30:03 PM

Sound good to me Nige, go for it.

I've started the page off for you with the "New page" code here ... http://www.biopowered.co.uk/wiki/Two_stage_process ... have a read through in "Edit" mode and see if it makes sense?

Reading this page in conjunction with it will help ... http://www.biopowered.co.uk/wiki/Creating_pages

Not a problem if it screws up, just give one of us a shout and we'll fix it.

Otherwise send one of us the text and photos and we can upload.

Any suggestions for the text under the pics. on the soap page and was the layout OK?

Title: Re: Soap tests
Post by: Tony on December 17, 2010, 09:50:45 PM

We just need content, so if you want to type it out in any old random way we'll come and do all the boring formatting stuff then by all means :)

I've been a little inactive these last few days and I'm itching to get back into writing pages again - it's very satisfying to get this stuff down in one place.

I am envious of Julian's diagram skills, so also determined to try to get to that level :)

Title: Re: Soap tests
Post by: Julian on December 17, 2010, 10:52:39 PM

You have a little catching up to do!  I first started using vector graphics when a "386" was top of the range!

Need any help give me a shout.