Biopowered - vegetable oil and biodiesel forum

Vegetable oil motoring => Filter rigs => Topic started by: Rotary-Motion on November 20, 2012, 10:06:32 PM

Title: Emertion heater ring size?
Post by: Rotary-Motion on November 20, 2012, 10:06:32 PM: what size or thread is an emertion heater ring?

just stumbled on this baby could be good for filter rigs on heating or bio plants, internal coils solder pipes inside.

http://www.amazon.co.uk/Essex-Flange-Adaptor-Compression-Fittings/dp/B009QGXZQ0
Title: Re: Emertion heater ring size?
Post by: Head Womble on November 20, 2012, 10:07:29 PM: 2 1/4" BSP.
Title: Re: Emertion heater ring size?
Post by: Keef on November 20, 2012, 10:08:03 PM: 2 1/4" BSP I think :-\
Title: Re: Emertion heater ring size?
Post by: Rotary-Motion on November 20, 2012, 10:12:46 PM: kool thx

check link out and pic looks good

(http://img547.imageshack.us/img547/5962/capturemp.jpg)
Title: Re: Emertion heater ring size?
Post by: Head Womble on November 20, 2012, 10:14:40 PM: OY don't go editing your post so it looks like me and Keef are bonkers,
I know I am but I'm not sure about Keef.
OK so he probably is but I didn't say it.
Title: Re: Emertion heater ring size?
Post by: Head Womble on November 20, 2012, 10:16:59 PM: Just buy a standard immersion blanking plug and solder in two 15mm comp fittings,
save £££
Title: Re: Emertion heater ring size?
Post by: Rotary-Motion on November 20, 2012, 10:17:09 PM: Quote from: mark on November 20, 2012, 10:14:40 PM
OY don't go editing your post so it looks like me and Keef are bonkers,
I know I am but I'm not sure about Keef.
OK so he probably is but I didn't say it.

hi mark

sorry dude you lost me but i didnt mean anything if somethings missing, only to show an odd bit of kit that could save alot of soldering and work for future ref

;D
Title: Re: Emertion heater ring size?
Post by: Rotary-Motion on November 20, 2012, 10:17:44 PM: Quote from: mark on November 20, 2012, 10:16:59 PM
Just buy a standard immersion blanking plug and solder in two 15mm comp fittings,
save £££

hmmm true, well i was excited anyhoos lol ::)
Title: Re: Emertion heater ring size?
Post by: Head Womble on November 20, 2012, 10:19:26 PM: Little things and little minds and all that ;D
Title: Re: Emertion heater ring size?
Post by: Rotary-Motion on November 20, 2012, 10:31:12 PM: 8)
Title: Re: Emertion heater ring size?
Post by: Tony on November 21, 2012, 08:33:00 AM: I'm with Mark, buy a blank then blowtorch in fittings/pipe, £30 is a bit steep just to get compression fittings.