Biopowered - vegetable oil and biodiesel forum

Biodiesel => Biodiesel equipment => Topic started by: jaybee on January 17, 2023, 08:32:04 AM

Title: TAM120 pump/dry wash tower wanted
Post by: jaybee on January 17, 2023, 08:32:04 AM
Hello!

I'm a newbie to biodiesel and looking to get my rig setup. I have a processor now, but need to build the rest of the setup.  I don't suppose anyone has a fairly high capacity open impellor pump like the clarke TAM120 gathering dust a corner some place?
I'm also interested in a dry wash tower if anyone has one.
Located in south west but can travel.  Many thanks.
Title: Re: TAM120 pump/dry wash tower wanted
Post by: Vijay on January 17, 2023, 08:45:46 AM
Might be able to help with a dry wash tower
Title: Re: TAM120 pump/dry wash tower wanted
Post by: dgs on January 17, 2023, 01:14:15 PM
Welcome jaybee.
Title: Re: TAM120 pump/dry wash tower wanted
Post by: Julian on January 17, 2023, 05:43:57 PM
Welcome.

Good choice of pump, been using one for years, often run at circa100°C although only rated to 60°C.  Not the most economical pump but check out the thread on periodic mixing ... offers a massive saving on electricity.

If you get a TAM120 there are .stl files on the wiki to 3D print a replacement terminal box and cooling fan.
Title: Re: TAM120 pump/dry wash tower wanted
Post by: neisel on January 18, 2023, 09:25:51 AM
This one?

http://biopowered.co.uk/forum/index.php?topic=3092.0
Title: Re: TAM120 pump/dry wash tower wanted
Post by: dgs on January 18, 2023, 01:16:28 PM
Quote from: neisel on January 18, 2023, 09:25:51 AM
This one?

http://biopowered.co.uk/forum/index.php?topic=3092.0

Thats it.
Title: Re: TAM120 pump/dry wash tower wanted
Post by: jaybee on January 18, 2023, 06:31:06 PM
Good to know.  Thanks.  I'll try and hunt one down!

Quote from: Julian on January 17, 2023, 05:43:57 PM
Welcome.

Good choice of pump, been using one for years, often run at circa100°C although only rated to 60°C.  Not the most economical pump but check out the thread on periodic mixing ... offers a massive saving on electricity.

If you get a TAM120 there are .stl files on the wiki to 3D print a replacement terminal box and cooling fan.