Biopowered - vegetable oil and biodiesel forum
General => Chatter => Topic started by: neisel on May 20, 2020, 05:29:20 PM
-
https://www.ebay.co.uk/itm/BIO-DIESEL-BIODIESEL-PROCESSOR-HIGH-ACCURACY-WATER-TEST-SANDY-BRAE-/351248474369?_trksid=p2385738.m4383.l4275.c10
We sell products that are kinder to the environment and help you recycle. intelli-ink..... the intelli-gent choice!!
Do you water wash your biodiesel?
Do you think your biodiesel has a high water content?
Normally biodiesel will have a water content in excess of 1000ppm after water washing!
To help you determine the water levels in your biodiesel we are offering this very low cost test service.
This listing is for the purchase of our sample testing service which is One Test Procedure to test your sample of biodiesel for water using our Karl Fischer 758 KFD Titrino which costs about £3000.
Simply send us your biodiesel sample and we will test it for you using our
Karl Fischer 758 KFD Titrino
We will test your 1 sample of biodiesel only for £5
Having this test undertaken elsewhere can cost you up to £100!
This expensive laboratory test apparatus is far more accurate than a Sandy Brae test which you would expect as our 758 KFD cost over 10 times as much.
After water washing your biodiesel you should reduce the water content in it if you wish to minimise water damage to your diesel pump and engine etc and wish to meet the current UK specification of 500ppm or the German Specification of 300ppm.
Simply follow the following procedure.
1. Purhase the test service in this listing for £5 and I will immediately send you and email with our laboratory address to which you will send your sample. I also supply you a telephone number so that you can talk to our chief technician and discuss your results.
2. Send us your 50ml bottle sample of biodiesel with the date you took the sample and your name and address on it (you pay the postage costs which is normally less than £3 by Royal Mail)
3. Once we receive your sample we will send you your test results within a few days. Your test result will be expressed in PPM which is parts per million.
-
It's been on there for years neisel. It's my water test, I have a reciprocal agreement with Richard Kembray from Intelink. Not that anyone ever pays the £5 for the test.