Biopowered - vegetable oil and biodiesel forum

General => Chatter => Topic started by: Fluffle-Valve on January 03, 2017, 09:03:46 AM

Title: Just saying hello.
Post by: Fluffle-Valve on January 03, 2017, 09:03:46 AM

Hello everyone,

I'm just popping my head in the door and having a good read. Been reading lots of posts/threads over the last couple of weeks and still learning. I was pointed in this direction from the Vegetable Oil Diesel Forum, so I'm hoping to join in the banter on here as well.
I've jumped right into the Biodiesel World with both feet, not knowing what's what. I had heard of biodiesel but had never really looked into it. So, since completing a 200TDi conversion on my old Series III Landy Rover, the subject with using SVO/WVO/Biodiesel has come up several times and now I'm on route to building my own Biodiesel Processing Plant.
I'm totally green to the world of Oils and processing, so please excuse me if I'm asking some obvious questions.

Regards,
Frenchie.

Title: Re: Just saying hello.
Post by: Tony on January 03, 2017, 10:09:21 AM

Hello, welcome, and good luck on your brewing venture!

I remember how it was to get started.  A lot was confusing and bit of an uphill battle to understand what was going on.  But you'll get there and it will all seem very natural before you know it.  The new processing methods make it a lot simpler than the old titration methods so it's never been easier to get started - and there is excellent, experienced advice available both here and on VOD.

Title: Re: Just saying hello.
Post by: Julian on January 03, 2017, 11:03:05 AM

Welcome to biopowered.

The wiki should give you most of the info you require, but post up any questions and we'll try and confuse you further.

Title: Re: Just saying hello.
Post by: Dickjotec on January 03, 2017, 02:19:57 PM

Welcome to the light side!!!