Biopowered - vegetable oil and biodiesel forum

Biodiesel => Biodiesel equipment => Topic started by: Jamesrl on April 26, 2016, 04:57:23 PM

Title: jgs yellow pump impeller.
Post by: Jamesrl on April 26, 2016, 04:57:23 PM
Does anyone know if a TAM105 or 120 impeller fits one of jgs's yellow pumps.

There's a possibility one may  need to be replace in the very near future.
Title: Re: jgs yellow pump impeller.
Post by: julianf on April 26, 2016, 05:45:22 PM
The yellow 120lpm jgs pump i have is closed impeller.

Did he do smaller ones with open impellers?
Title: Re: jgs yellow pump impeller.
Post by: Jamesrl on April 26, 2016, 06:15:29 PM
The yellow 120lpm jgs pump i have is closed impeller.

Did he do smaller ones with open impellers?

Yes, he did smaller pumps around the 50ltr/min with peripheral turbine type impellers as in the leo and tam105.
Title: Re: jgs yellow pump impeller.
Post by: oakwoodtv on April 26, 2016, 11:35:59 PM
Have a 105 impeller in stock can measure it for you if that will help. 
Title: Re: jgs yellow pump impeller.
Post by: Jamesrl on April 27, 2016, 01:13:34 AM
Have a 105 impeller in stock can measure it for you if that will help.

If you'd be so kind Richard, thanks.
Title: Re: jgs yellow pump impeller.
Post by: dgs on April 27, 2016, 10:04:08 AM
I have one of the 100lpm ones where the motor has burnt out (it is blue, before he did the yellow ones) you are welcome to it Jim if it is any good to you.
Title: Re: jgs yellow pump impeller.
Post by: oakwoodtv on April 27, 2016, 05:13:15 PM
Impeller dimensions.

Width 60mm Bore 12mm and 6.5mm thick.

Hope this helps.

Richard.
Title: Re: jgs yellow pump impeller.
Post by: Jamesrl on April 27, 2016, 05:47:11 PM
Impeller dimensions.

Width 60mm Bore 12mm and 6.5mm thick.

Hope this helps.

Richard.

Thanks for that.