Biopowered - vegetable oil and biodiesel forum

Vegetable oil motoring => Vehicles => Topic started by: alexanderfoti on March 04, 2016, 07:59:04 PM

Title: Injector rebuild guide.
Post by: alexanderfoti on March 04, 2016, 07:59:04 PM

http://fotifixes.com/2016/03/04/how-to-rebuild-kubota-d850-injectors/

Hi all

Did a rebuild guide after doing my kubota injectors. Same procedure should apply to Merc injectors etc.

http://fotifixes.com/2016/03/04/how-to-rebuild-kubota-d850-injectors/


You can lap the sealing sections in with 800 grit wet and dry if you find they are leaking, left that bit out!

Title: Re: Injector rebuild guide.
Post by: Julian on March 06, 2016, 10:52:39 PM

Good write up, Alex.

I've lapped faces on plate glass using Tcut.

Gives a very fine surface, but you can obviously use other compounds.

Title: Re: Injector rebuild guide.
Post by: alexanderfoti on March 06, 2016, 11:23:04 PM

Many thanks!

Its quite satisfying having them all clean, ready to go in.

No leaks yet but the stupid injector pump hasmt arrived so I cant confirm if they work properly or not!