Biopowered - vegetable oil and biodiesel forum
General => Chatter => Topic started by: Rotary-Motion on April 17, 2013, 08:22:03 AM
-
made one of these yesterday cos i was bored, the center rail slides up and down to suit all shape canvasses wit a wing nut bolt, made for a girl who paints and draws and tea shirt design artist...
i should be finishing me van really hehe ;D
enjoy
can also be used for veg charts ::)
(http://imageshack.us/a/img541/6911/20130416144815.jpg)
(http://imageshack.us/a/img715/7080/20130416144824.jpg)
-
Very nice. :) I see you also collect tyres, like me!
-
Nice job hope she likes it
-
yes those 2 are expensive commercial 8 ply for me van matching, there are 4x for me car out of picture shot :)
yes dick she loved it, also a little birdy told me you may be bathing outside this year :) and i still gt the secondary pump if you need it
-
Very impressive ... so you're a bit of a wood worker then?
Have a look at this machine, the guy built himself ...
http://www.youtube.com/watch?v=PDPrFJazD3Q&list=SP7A1D94FF4FF10854&index=1
and if you like that have a look at his other videos, all good stuff.
-
My father used to teach woodwork at college. Some of the things he could make were incredible. Dovetail joints all linked together with a surface like glass - I'm sure his handmade cabinets and equipment drawers are worth a few quid. :)
-
very very clever
-
yes those 2 are expensive commercial 8 ply for me van matching, there are 4x for me car out of picture shot :)
yes dick she loved it, also a little birdy told me you may be bathing outside this year :) and i still gt the secondary pump if you need it
I'll trade it for the bit in the engine shed. Tell C I got it off the trailer, getting it I to place on Saturday, all being well!
-
yes those 2 are expensive commercial 8 ply for me van matching, there are 4x for me car out of picture shot :)
yes dick she loved it, also a little birdy told me you may be bathing outside this year :) and i still gt the secondary pump if you need it
I'll trade it for the bit in the engine shed. Tell C I got it off the trailer, getting it I to place on Saturday, all being well!
? lost me there, bit in shed, but yes its yours free the pump...
-
Bit in shed ===== sine wave inverter!
-
oh yes hehe, its a deal....
hows that new strip and rebuild coming dick?
-
Almost past the dirty parts. Going to paint the bunker on Sunday. Still awaiting the parts from Ireland but "billy"is now almost ready to receive them. I have made a new coolant tank as the old one had developed a rust hole. I have had to spend time making the base for the HT so we can get it in place on Saturday. I may fill it on Sunday to test for leaks, daughter has got to clean it first though!!!